If Your condo suite lock is builder's grade and feels flimsy.
Then Upgrade the deadbolt within the building's rules.
Most buildings allow a better lock in the same finish; we check with management first. Deadbolt Installation

Every street in Mineral Springs has a door that sticks, a deadbolt that needs a shove, or a key that was lent out and never came back. We rekey, repair and replace lock hardware for homes and businesses here, explain what we find in ordinary words, and leave you with keys that turn the way they should. The same crew covers Christies Corner, Copetown and West Flamborough.
Same fees day or night · Mineral Springs
Pick the closest, or call (289) 203-6954
Lockout ServicesLocked out of a home or business, a key snapped in the lock or a lock that has seized: entry with the least damage…
Change or Rekey LocksNew keys for the locks you have, or new locks where the hardware has worn out: rekeying, replacement, deadbolts, smart…
High Security LocksCylinders and deadbolts built to resist picking, bumping and drilling, keys that cannot be copied without…
Commercial LocksLocks for shops, offices and buildings: rekeying at turnover, commercial-grade hardware, exit devices, master key…Households in Mineral Springs often collect locks from different decades that all take different keys. We rekey them to a single key where the hardware allows, replace the one or two that cannot be matched, and set up a spare that lives somewhere sensible. You leave with a lighter ring and a clear idea of which key does what.
Nearby Hamilton, Ancaster Heights, Clearview Estates, Dancaster Courts, Greenside Acres, Harmony Hall II, Highland Park Survey, Maple Lane, Maple Lane Annex, Maywood, Mohawk Meadows, Nakoma, Oakhill, Parkview Heights, Perth Park, Pinecrest, Pleasant Valley and Spring Valley
Getting you back inside, gently.
18 years in business · Let's sort out your door: (289) 203-6954
Mineral Springs
Think of this as the workshop list for Mineral Springs. Emergency lockouts and key extraction. Rekeying after a move or a staff change. Lock replacement and deadbolt installation. High-security cylinders and reinforced strikes. Commercial hardware, closers and master keys. Safe opening and service. Key cutting for house and car.

Business Lockout Service, Smart Lock Installation, Home Lockout Service, Deadbolt Installation, Car Lockout…
Tap a situation. The answer opens here.
If Your condo suite lock is builder's grade and feels flimsy.
Then Upgrade the deadbolt within the building's rules.
Most buildings allow a better lock in the same finish; we check with management first. Deadbolt Installation
If You lost the key to your mailbox in the lobby bank.
Then Have the mailbox lock replaced through management.
Lobby mail units belong to the building, so we arrange it with the property manager. Mailbox Lock Replacement
If Someone in the building has a key to your unit.
Then Rekey the suite lock.
The cylinder is re-pinned so only your new keys work; any building access key is preserved. Lock Rekeying
HamiltonOntario
Every square is one home in a hundred.
Yes. The same skills apply to any residential lock: a storm door that self-latched on the porch, the man-door into the garage, a shed, a gate with a padlock or a keyed latch, and a mailbox or storage locker in a condo building. Tell the locksmith about every opening involved so the right tools are in the van. Several small locks opened in one visit is common, especially after a move when keys were never handed over.
Yes. From outside, an exit device is operated through its trim, which may be a keyed lever, a pull with a cylinder or a bare rim cylinder. Depending on the trim fitted, picking or decoding that cylinder either retracts the latch directly or unlocks a lever, knob or thumbpiece that then has to be turned to let the latch go. The bar, rods and dogging feature stay as installed for the emergency way out, and the bar is pressed afterward to confirm it releases the latch with one push.
A security strike is a heavier plate with a formed steel pocket that wraps around the bolt instead of leaving it in bare wood. It is set into the jamb and fixed with long screws, typically three inches, that pass through the jamb and the shim space into the framing, with the longest screws placed nearest the door stop where the bolt bears. Manufacturers specify the pocket depth so the bolt extends fully. The result spreads a kick across the wall stud rather than two small screws.
The bolt should extend at least 25 mm into the frame, which is the standard throw for a dwelling's entrance doors and the length most residential deadbolts provide. Part of the bolt stays inside the door for support while the rest sits in the pocket. A hardened steel insert that spins under a saw blade is a common feature worth having on doors that face a street or laneway.
On-site assessment
Call for a locksmith anywhere in Mineral Springs
(289) 203-6954, open 24/7.
On-site assessment preferred · (289) 203-6954, open 24/7