If Your condo suite lock is builder's grade and feels flimsy.
Then Upgrade the deadbolt within the building's rules.
Most buildings allow a better lock in the same finish; we check with management first. Deadbolt Installation

Customers in Maywood notice a storefront door that slams, drags or needs a shoulder. We service the closers, pivots and locks that keep a commercial entrance quiet and secure, fit cylinders that resist tampering, and set the hardware so the door greets people properly and locks tight after close.
Same fees day or night · Maywood
Pick the closest, or call (289) 203-6954
Lockout ServicesLocked out of a home or business, a key snapped in the lock or a lock that has seized: entry with the least damage…
Change or Rekey LocksNew keys for the locks you have, or new locks where the hardware has worn out: rekeying, replacement, deadbolts, smart…
High Security LocksCylinders and deadbolts built to resist picking, bumping and drilling, keys that cannot be copied without…
Commercial LocksLocks for shops, offices and buildings: rekeying at turnover, commercial-grade hardware, exit devices, master key…You will not be talked into more than the door needs. In Maywood we grade what is fitted, name the one change that would matter most, and stop there unless you ask for more. A household that wants the full upgrade can have it; a household that wants the sticking bolt fixed gets exactly that, done properly.
Nearby Hamilton, Ancaster Heights, Clearview Estates, Dancaster Courts, Greenside Acres, Harmony Hall II, Highland Park Survey, Maple Lane, Maple Lane Annex, Mineral Springs, Mohawk Meadows, Nakoma, Oakhill, Parkview Heights, Perth Park, Pinecrest, Pleasant Valley and Spring Valley
Getting you back inside, gently.
18 years in business · Let's sort out your door: (289) 203-6954
Maywood
Residents and business owners in Maywood can use this list to find the service that fits, then read what it involves before anyone comes out. Emergency openings are here. So are rekeys, lock changes, deadbolt and high-security upgrades, commercial door hardware, master keys, safes and key cutting.

Deadbolt Installation, Car Lockout Service, Safe Opening & Combination Change, Lock Rekeying, Ignition Lock…
Tap a situation. The answer opens here.
If Your condo suite lock is builder's grade and feels flimsy.
Then Upgrade the deadbolt within the building's rules.
Most buildings allow a better lock in the same finish; we check with management first. Deadbolt Installation
If You lost the key to your mailbox in the lobby bank.
Then Have the mailbox lock replaced through management.
Lobby mail units belong to the building, so we arrange it with the property manager. Mailbox Lock Replacement
If Someone in the building has a key to your unit.
Then Rekey the suite lock.
The cylinder is re-pinned so only your new keys work; any building access key is preserved. Lock Rekeying
HamiltonOntario
Every square is one home in a hundred.
Try the key while gently pushing, pulling and lifting the door. If it frees up in one position, the bolt is being pinched by the frame and the door is the cause. If nothing changes, look at the key: does it go fully in and refuse to turn, or spin freely? The first points to the cylinder, the second to the tailpiece behind it. Tell the locksmith which you found and the right parts come in the van.
Yes, at every cylinder that was rekeyed. Once the bottom pins are changed, a key cut to the old combination lifts them to the wrong heights and the plug will not turn. The locksmith proves this at each door by trying the old key after the new one, because any door missed from the list would still answer to the old key. That is also why the walk around the property at the start matters: every door meant to be included has to be on the list.
The bolt should extend at least 25 mm into the frame, which is the standard throw for a dwelling's entrance doors and the length most residential deadbolts provide. Part of the bolt stays inside the door for support while the rest sits in the pocket. A hardened steel insert that spins under a saw blade is a common feature worth having on doors that face a street or laneway.
Often, on cases that already take a threaded cylinder. Mortise cylinders are made in standard thread sizes and lengths with different cam shapes, and a new one is selected to match the case and the door thickness. That gives you keys cut on a machine and the option of keying the door alike with the rest of the house. A bit-key case has no cylinder to swap; its keys are made on the bench instead.
On-site assessment
Call for a locksmith anywhere in Maywood
(289) 203-6954, open 24/7.
On-site assessment preferred · (289) 203-6954, open 24/7